Machining Functions Recognizing and assigning — for a quick solution. Collar machining. Variable Reference Plane Height. Ruled surface. Cylindrical machining Constant and variable taper, also on cylindrical parts Ruled surface machining with automatic synchronization Inclined machining Collar machining Subsequent positioning of a taper despite cylindrical construction constant, variable or as collar machining.
Pocketing Variable Reference Plane Height Automatic threading and cutting off of the wire Diagonal threading Automatic positioning Automatic clustering of identical geometries Multi part programming. With just a few clicks the lead on and lead off strategies can be set or influenced. The Gear module is optionally available. Operation Strategies Cut by cut towards the optimum — for a safe and efficient operation. Strategies for attended and unattended day and night operation Punch strategies Reverse cutting Automatic cutting off of slugs User defined operation strategies can be saved as template.
Collision- and demoldability check Maximum taper angle and UV deflection check Calculation of the cutting time. Technology Database For all products and models — and for your specific requirements. Practice-Oriented, Pleasant and Individual.
Technical Specifications. The hardware recommendations of the respective CAD manufacturer apply. Just Try It. WibuCmRac file 4. Selected file: Test. I have read the privacy policy and I accept it. A First Impression of the System. In dialog with your application expert. Step 1 In a personal telephone conversation, your application expert will guide you through the live demonstration. Call us: - 97 92 Step 2 Click on the button and download the TeamViewer.
Today I replaced the lens with a 2. Same as the others here. Now the blown-out effect is even more pronounced and uncontrollable. Bubbah Did you mount it outside yet? I haven't been able to get a good quality picture that isn't blown-out with brightness during the mid-day. Not sure what's going on or if it's defective. I have a decent view at night but its almost worthless in bright daylight.
Anyone else having this issue? Darrel, I haven't mounted the camera yet, some important renovation work ongoing in my house since February. I'll plug it in a temporary location this week-end just to see. I wonder if the firmware is not partially responsible?
My indoor fiw where also affected since the sunny days are back, and I feel that it improved with the latest version. But it's still new, I upgraded this week. Now I use brightness between 2 and 4, contrast:4 and outdoor mode. Pay Attention. The lens is 'locked' with a tiny screw. Unscrewing the lens should be easier then. I damaged my screw-thread because it was very hard to get the lens out. Also I found that the original lens had better quality than the new 6 mm.
Hi, I have this camera and the colors are very bad in the sun. Can anything be done? As good the cam is, that really bothers me. I don't need the IR at night. So the filter would be the solution. If it works Did someone try'd the filter? Does it work? How's the color with the filter? Does anybuddy knows a address in Europe, to order one of the filters? Thanks in advance Stefan. I would second the request to find a usable infrared cut out filter.
I have four of the cams bought from deal extreme and I have bought outside dome enclosures for them. These cameras suck beyond belief at outside image in daylight. The fact that you cannot turn off the infrared lights at night but have to tape them or disconnect them is terrible. Hanging on a 20 ft ladder at night taping them over was a very exciting experience only to be heightemned by the absolute awful picture in the daytime.
Did anyone check out the link from my post above? Anyone else finding the whole picture blown-out in brightness with mid-day sun on the subjects? I have found that a reboot seems to make it slightly better, but should I have to reboot the camera each day a few times to get a manageable recordable picture??
Such a bummer Hi everybody, Just want to warn you about DealExtreme. I also ordered the set a 6 lenses from their website. A couple of weeks ago I received my order but when I opened the envelop I was very surprised to find only one lens. I sent few emails to Deal Extreme asking them why I got only one lens and not 6 as mentioned on the order confirmation and as I paid. I never get any answer. I decided to complain to Paypal and ask a refund.
Today I got an answer from Paypal saying " It does not apply to complaints about the attributes or quality of goods received. Therefore, we are unable to reverse this transaction or issue a refund. I thought that paying with Paypal was a guarantee for the buyer. And I think that's Deal Extrem knows that, that's why they didn't reply to any of my emails. So, before ordering, be careful!
It seems that their "buyer protection" only works when you buy from eBay it worked already for me once Yeah me too I'm very surprised, I thought that Paypal was a good protection for buyers and not only when buying from ebay. Except Deal Extreme, does somebody has found another place where to find lenses for the cameras? It's a shame that Foscam doesn't propose different lenses in option.
Anyone tried one of those filters yet? I'm not sure which to choose from that website. The picture quality is abysmal from the outdoor cam during the daytime. In fact today I put my indoor cam on the back patio looking out the screen and it has a MUCH better image than the outdoor version. I'm embarrassed to show anyone the feed except at night. When I physically examine the FIW, the front of the camera appears that it may, in fact, be sealed with rubber gaskets.
However, the rear doesn't look so waterproof to me. The WiFi connector, the Ethernet connector and the entry point for the cable all appear to have no obvious water protection. Bear in mind that I have not disassembled the camera to see what waterproofing steps were taken, especially in the rear. My question for you folks that have disassembled a FIW is what waterproofing did you observe? Also, has anyone actually put the waterproof to an water test? Is the camera waterproof or merely water resistant?
Just from observation it appears to me that the camera's front is water resistant but not the rest of the camera or cables. She indicated that she duplicated my test and got no false alarms with this firmware. She is right! Therefore, as a courtesy only, without warranty. Everything that you need is in a file named FIW Before I give feedback to the seller I would to confirm if my camera is a real foscam. Can someone take a look to theses pictures and tell me?
JPG Any help will be wellcome! Cojoncio, The model on the small label is the same as mine. Does look like a Foscam to me. Thanks for the reponse. Another thing: it looks like that wifi camera has a very short range. More than 10 ms. I improved the range slightly by replacing the antenna on my router with a stronger one. It would have done the same on the camera but I didn't find an antenna with the right connection yet. Hi, Thought you could be interested in knowing that I managed to remove the cable through the little hole in the back and through the nut, without damaging the connectors or the cables.
I did this to replace the huge ethernet connector plus all others with a single cable just for feeding power. I'll also hook this cable up directly to the connector, since I couldn't find a female aerial for the power supply plug.
I'm not sure but I may be having a different problem with a lens swap. I unscrew the lens cover and everything works fine. Not sure I can leave the lens cover off due to rain and such. Is this the same problem others have had when swapping lens. Could you give the url of the shop where you found it?
That could be a solution for people who complain about the colour rendering of those Foscam cameras you know, pinkish trees and grass. Do you get better colour rendering during the day with that lens?
That's the strange part. Both are real foscams. I'm wondering if the IR plate orientation could make a difference, the sensor being on the bottom instead of the top of the camera.
I've tried putting a collar around the lens, nothing seems to help except pulling the glass lens cap off of the camera. Only has the problem at night when IR is needed. On your situation I've come to almost loathe my outdoor cam. Then after sunset, I get a black image.
The night picture then is almost of better overall quality than the daytime one. But having to do it twice a day is really stupid. I'm about to sort out some way to automate it. On the note of motion detection. The built in Foscam motion detection is not accurate enough for outdoors, too many false alarms.
I use really nice camera software that allows infinite motion settings but for outdoors with clouds, sun, trees I need a more accurate solution. How do you setup a remote motion detector to trigger the camera. Is this a whole system or a certain type of motion detector with alarm output. It is interesting to note that most motion detecting alarms and chimes do not false alarm over trees casting shadows on a bright sunny day.
This is really bad because you are going to get a ton of false alarms and I do every morning when the sun comes up. And when it goes down as the camera auto adjust for the light it triggers its own alarm. Decrease the sensitivity and it no longer even detects a horse much less a person moving until they are so close as to actually block the camera view.
Bubbah, I'm kind of stuck with my W. I posted earlier that I replaced the 6mm lens with a 3. Well, I went back to the 6mm lens and still have the problem so I messed something up. If I remove the outer glass cover the IR works so I'm guessing the light sensor is not working. Is there something I can check on these camera's to get it back working at night?
I've just spend some time reading your previous comments again just to be sure I didn't miss something. So, at the moment, let's say, if you keep your camera powered and a live view page on your browser, when you start screwing the lens cap back on the camera the night vision will fail at some stage?
If you try this in the dark, do you see the reddish IR leds turning off at some stage of screwing the cap? And, I don't know if it's possible but: you only swap the lens, not the whole IR plate do you?
Made no difference in the picture. I own several Foscams since a few months. Among them one outdor FIW , which caused and causes severe problems.
The first one could only establish a wlan connection when placed less then 2m from the router same room. I got a replacement. That cam worked correctly for two days. Then, while on wlan, connection got lost. Neither the IP camera tool nor the router could find the cam again — regardless if wlan or lan connected. After several long reset pushs and plug off-plug ons, connection was back - for two hours.
Then the same problem: total loss of connection. This time, the reset method doesn't get connection back. Foscam's technical staff tells me that the wlan connection loss is a known problem on which they are working, but in my case, they suspect a problem with the network module. I have a few questions here: - Do others on this board have experienced similar problems with the outdoor cam? A few months? A year? I haven't opened the cam so far warranty.
The photos suggest that the interior circuit board can easily be removed through unplugging. Is that correct? I installed one and now the picture is great! Check my site Not problem for day use. For cons, at night the camera does not seem consistent with the characteristics: IR range up to 20 m. I did 2 experiments. At night. First, with no modification, the IR range is about 3 m. Second, I unscrewed the front ring which removed the glass : ir range about 15 m. In this case, I lose the water-proof, and the Ir led and the lens are not protected.
Conclusion, the glass is not transparent to IR. To have an IR range of 20m or 15m as described in the caracteristics, I Have to remove the glass. It Is not available. Do you have the same problem? Best regards. This is a temporary measure that last longer than expected until I find a better spot to fix it outside.
So at the moment I cannot say, but I'll give it a try in my garden soon to verify this. Hi everybody: To solve the IR glare problem, it is as easy as surrounding with black tape the black plastic cylinder that surrounds the lens when the cam is closed. This way, we make this cylinder "longer", wich avoids IR ligh to get into the lens cavity throught the gap between the cylinder and the IR plate. It is a real problem. I suppose others are Ground, Rx and Tx but which way?
Thank you Bubbah i've found this is the same wiring, thank to my multimeter. I performed "the back to live protocol" without success. The procedure is the same for the FIW but next you'd need the ip camera tool in working order so it can detect the device and you can use it to upload the latest fw and webui to the camera. A possible reason for your ip camera tool problem could be that IE was not closed when uninstalling the it, which would prevent the proper cleaning of the old activex controls.
It is also important to reboot the comptuter between the uninstallation and installation operations. I just got my FIw camera and it worked for 3 days until it stopped working. I treid to connect it through ethernet and unable to get an IP address through the IP Camera tool software. I tried to hit the reset button several times and no luck. After reading the comments here, it sounds like this is a common problem. I am technical but not strong in soldering or rewiring cameras unless there is a step-by-step instruction.
I keep reading about these cameras being "bricked". I have no idea what that means but it sounds terminal. Any help would be appreciated since my FOscam dealer is useless. I have it working over my driveway, watching over my cars.
This should give be a broader swath e. Does this make sense to you? Do you think it will work? Noticed that the one of the sellers mentioned i. He never mentions what the differences are, but he offers different set of lenses for either one.
Are you, or anyone on your forum aware of these differences and can enlighten me as to what they are? Mahalo Thanks you in Hawaiian , Barry. I guess the lens is of different quality even though I don't expect an improved colour rendering. I have on order the set of 6 lenses from DX. The cameras cost about the same as from elsewhere e.
One of the main reasons I chose Amazon was their day return policy. The cameras are guaranteed by the seller to be original FOSCAM, so I have 30 days to resolve this issue, and if its not then deal with Amazon vice the seller on the return of the product.
BTW, great website also, the weather is great here in Hawaii. Hope its not to cold in Ireland. Aloha, Barry. I became aware that modifying and using the 05W alone would not totally accomplish what I was hoping to accomplish. Therefore, they are designed with very narrow focus. Does anyone know where to download latest FIW firmware? On Foscam there is not downloadable. Latest Ipcamera tools says "cannot able to open the file" obviously the right firmware file, after decmpressing the zip.
From inside the ipcam web gui, the error is: unable to read the file, then IE close itself. Many thanks in advance. Barry Strangely your lastest post does not get on the blog, maybe it's too long. However I got it through my email notification. The short answer: I assume that the lens spec should match the sensor size but we can't be too picky as the choice on DX and eBay is quite limited.
This may also explain why the picture includes part of the camera tube after swapping the lenses see the 2. I can't speak for the FIW as I don't have one. On my current PC the cameras all record video perfectly. Hi, I have an FIW. I can wire it to my wireless router or connect to it wirelessly. Fine, I can administer it, view it etc etc. Here's the weird thing.
What is more, the FTP test works fine on hard wire but as soon as wireless is enabled, hitting the test button just causes the camera to freeze. Click here for details. Continually developed by a team of WEDM experts, it boasts the most complete tools to give the ultimate solution for all simple and complex wire-cutting needs. Projection Wizard for the automatic creation of Z-constant geometries Simulation including offsetting, demoldability and collision checking Automatic threading, cutting off and positioning of the wire Automatic calculation of the start position including start hole output Constant and variable taper Ruled surface machining Undercut control Inclined machining Tapered and cylindrical pocketing Automatic cutting off of slugs Triangular and multiple tags Section offsetting Variable Reference Plane Height Technology databases for all common machine types Lead On and Lead Off technology Operation strategies can be completely saved.
Optimization in all fields of application. Slug Retention. Collar Machining. Controlling Additional Axes of Rotation. Ruled Surface Pocketing. Partial Pocketing. Radius Manipulation. Partial Figure Machining. Turning Tool Module. True Contour Machining. Gear Module. What is EDM wire used for? How fast does wire EDM cut? How accurate is Wire EDM? What materials can wire EDM cut? Can you wire EDM copper? How does EDM wire cutting work?
0コメント